Manual Update of Moto X 2013 to official Android 5.1
About Phone Software Updates. Solution to the problem is always there after being found out. If you have a rooted device or installed a custom ROM e.g CyanogenMod, AOKP or Paranoid Android, you will have the problem that you’ll unable to automatically flash the new Android 5.1 Lollipop via OTA. Or you will manually update your Moto X 2013 to official Android 5.1 if you cannot wait for the arrival of the official updates in your region. You can follow the instructions and guidelines given below: 
Moreover, the guide under discussion can be used with both rooted and locked devices and with stock or custom ROMs. By flashing the stock Android 5.1 Lollipop you can find the solution many software related problems like bugs, lags, alerts, screen freeze, force close errors, battery drain, boot loops, heating issues or blackouts.
Please Also Note:
What guidelines given here or given in the the guide abou the Official Android 5.1 Lollipop firmware have compatibility only with the 1st Generation of Moto X (Asian Variant) model number XT1052. If do not install this guide on the right device, the result will be nil. So do not try to install this guide on any other device or incorrect variant. Before you do anything check the model number of your device first.
Beware of the Risk
There is always anomaly if you do not follow the given exact instructions. In the same way as a rule of the company or a warning, AndroidXDA.net will not be held responsible for any kind of damage or any anamoly to your Moto X 2013 XT1052, however installing an official update will not void the warranty of your Moto X. Be informed to do everything but at your own risk. Agreed?
Before Proceeding To Get Started:
i. You need to take a proper backup of all your important data and settings before proceeding to the installation guide.
ii. It is necessary to enable USB debugging on your phone by going to Settings
About Phone. Tap on the build number for a few times to enable “Developer Options and then Settings – Developer options and check the USB debugging. iii. Temporarily deactivate antivirus programs from your PC.
If you have rooted your Moto X then after applying the stock Lollipop OS, the root access will be officially cancelled.
iv. Last but not the least, make sure that the battery of Moto X should be charged at least about 70%. Follow the above instructions to get fruitful results.
The Steps Required for Updating Moto X 2013 with Official Android 5.1 Lollipop OS
These steps are necessary for you to follow:
First Step: You need to download the Official Android 5.1 Lollipop firmware (Blur_Version.212.44.26.ghost _row.AsiaRetail.en.03.zip) from the above link on your PC for the Moto X 2013.
Second Step: It's important to save the firmware file on the desktop of your PC without extracting.
Third Step: Then connect your Moto X with the PC using its USB data cable.
Fourth Step: Also transfer the firmware update file to the root folder of your SD card on the device.
Fifth Step: Now disconnect the device now and turn it OFF in order to boot into recovery mode.
Sixth Step: Now wait for a few seconds and then press and hold the Power + Volume Down + Home buttons altogether for about 3-4 seconds and then release the buttons. A boot menu will be displayed on the Moto X. Then scroll down on “Recovery” and select by pressing on Volume Up.
Seventh Step: Select “Apply Update from SD card” and follow on-screen prompts to proceed while the Moto X is now in the recovery mode, .
Eighth Step: Once the installation is successfully finished, select “Reboot system now” from the main menu of recovery.
Now it is done! Succeeded! You’ve successfully updated your Moto X 2013 to the latest official Android 5.1 Lollipop. Next you will read more informative stuff on my sight about android.
No comments:
Post a Comment