J110MUBU0AOH1 Android 5.1.1 Lollipop Firmware on Galaxy J1 ACE SM-J110M
A new development of android phone is here that Galaxy Ace J1 is a Samsung’s budget smartphone that brings for you the fine specifications such as 1.3 GHz Dual Core Processor, 512MB RAM, 4.3 Inch WVGA Super AMOLED Display, 5MP Camera With LED Flash and 1800mAh Battery. It has been made available for its users. Therefore if you have Galaxy Ace J1 then you’ll be glad to learn that the latest Android 5.1.1 software is now available for these devices. Note that the build number of this Android 5.1.1 stock firmware is J110MUBU0AOH1. In case of any difficulty, here is the detailed step-wise guidelines for the users as to how to install Android 5.1.1 update on Galaxy J1 ACE model number SM-J110M.
What is In This Guide
Here in this guide you will find the necessary instructions. Odin flashing tool is to be used to install the complete firmware as well as the stock recovery, as a result of this process, all the changes made to Galaxy J1 Ace such as root, installed apps, data and custom recovery etc will be lost.
Take Proper Back-Up
But you shouldn't forget to take proper back up of all your important data, in case anything goes wrong, you’ll be able to reget your lost data back. Proceed according to the given guidelines this latest Android OS firmware version on your phone and update.
ii. Verify that you’ve properly installed the Galaxy J1 ACE USB Drivers on the PC.
iii. Enable USB Debugging Mode on your Galaxy J1 ACE by navigating to Settings > Developer Options > check the USB Debugging option.
iv. If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost. The custom recovery will be replaced by the stock version. If the Galaxy J1 ACE is rooted then after installing the official firmware, it will no longer belong to a rooted version.
v. Battery of your mobile should be charged at least about 80% before starting the installation guide.
Here in this guide you will find the necessary instructions. Odin flashing tool is to be used to install the complete firmware as well as the stock recovery, as a result of this process, all the changes made to Galaxy J1 Ace such as root, installed apps, data and custom recovery etc will be lost.
Take Proper Back-Up
But you shouldn't forget to take proper back up of all your important data, in case anything goes wrong, you’ll be able to reget your lost data back. Proceed according to the given guidelines this latest Android OS firmware version on your phone and update.
Model Name | SM-J110M |
Country | Mexico (Movistar) |
Version | Android 5.1.1 |
Changelist | 760256 |
Build date | Mon, 10 Aug 2015 11:20:17 +0000 |
Product code | TMM |
PDA | J110MUBU0AOH1 |
CSC | J110MTFG0AOH1 |
Note What Is There In This Guide?
What this guide contains is very important. It contains the stock J110MUBU0AOH1 Android 5.1.1 Lollipop firmware file and now what you should know is that these instructions can be used only with Samsung Galaxy J1 ACE model number SM-J110M. Don't attempt to try to install this firmware on any other device or incorrect variant. Look into the model number of your phone before going ahead to the installation guide.
i. Take a proper backup of all the important data and settings on Galaxy J1 ACE before proceeding to the installation guide.What this guide contains is very important. It contains the stock J110MUBU0AOH1 Android 5.1.1 Lollipop firmware file and now what you should know is that these instructions can be used only with Samsung Galaxy J1 ACE model number SM-J110M. Don't attempt to try to install this firmware on any other device or incorrect variant. Look into the model number of your phone before going ahead to the installation guide.
Keep in mind before getting started:
ii. Verify that you’ve properly installed the Galaxy J1 ACE USB Drivers on the PC.
iii. Enable USB Debugging Mode on your Galaxy J1 ACE by navigating to Settings > Developer Options > check the USB Debugging option.
iv. If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost. The custom recovery will be replaced by the stock version. If the Galaxy J1 ACE is rooted then after installing the official firmware, it will no longer belong to a rooted version.
v. Battery of your mobile should be charged at least about 80% before starting the installation guide.
Step-Wise Installation Android 5.1.1 Update on Galaxy J1 ACE SM-J110M
As a first step Download the J110MUBU0AOH1 Android 5.1.1 Lollipop firmware (J110MUBU0AOH1_J110MTFG0AOH1.zip) file and Odin tool (Odin3_v3.10.7.zip) for your Galaxy J1 ACE on the desktop of the PC from the above given links.
Now extract the Android 5.1.1 firmware file to get .tar.md5 extension and also extract the Odin .zip file as well.
Switch off the Galaxy J1 ACE to boot into Download Mode.
Switch on the phone by pressing and holding Home + Power + Volume Down buttons at the same time.
Now launch Odin3 v3.10 on the PC (as Administrator).
While the Galaxy J1 ACE is currently in Download Mode, connect it with PC and wait for a while till Odin detects it. If the drivers are installed correctly then the ID: COM box will turn light blue and “Added” message will be appear in Odin after phone is connected successfully.
In Odin, click on the AP button and navigate to the firmware file that you’ve already extracted and placed on the desktop of your PC.
Make sure that you’ve checked Auto Reboot and F.Reset Time options and the Re-Partition option must be unchecked.
In Odin, click on the Start button to begin the installation process that may take a few minutes to completed.
Once the flashing process is finished, the Galaxy J1 ACE SM-J110M will be automatically rebooted. Step No 11:- Disconnect the device from the PC after the home screen appears.
And at last you’ve installed the J110MUBU0AOH1 Android 5.1.1 Lollipop stock build on the Galaxy J1 ACE successfully.
No comments:
Post a Comment